WR222-WLAN-5G

The IIoT router WR222-WLAN+5G/LTE/NB1 brings serial and wireless LAN data to the cellular network. Featuring 5G RedCap, it delivers power-efficient connectivity across 5G SA Sub-6 bands. It supports 5G/LTE/NBIoT to wireless LAN redundancy and 5G/LTE/WLAN auto offload to optimize network performance. The RS232/422/485 port connects to meters, sensors, or Modbus RTU devices to send data to the remote cloud center over the cellular or WLAN network by Modbus TCP or secured MQTT(MQTTS). To safeguard cybersecurity, security features such as Firewall, IPSec, OpenVPN, GRE tunnel are supported. The embedded MQTT and RESTful API enables instant public cloud integration such as AWS or Azure. The private cloud platform ThingsMaster and ThingsMaster OTA can also be set up for an instant and secured access to receive data or manage devices remotely.
Related Downloads Inquiry cart

Dual Radio 5G/4G/LTE/NBIoT + Wi-Fi Wireless Network

Model with 5G: WR222-WLAN+5GRC

    3GPP Rel-17 RedCap SA

    5G SA Sub-6: 226 Mbps (DL) / 120 Mbps (UL)

    LTE Cat.4 2x2 MIMO, 150 Mbps (DL) / 50 Mbps (UL)

Model with 4G Cat 4: WR222-WLAN+LTE

    LTE Cat.4, 2T2R MIMO provides 150M downlink and 50M

    uplink

    4G/3G/2G full cellular network compatibility

Model with LTE Cat 1/ Cat1bis: WR222-WLAN+LTE1

    LTE Cat1, 10Mbps DL/5MB UL

Model with NB-IoT/M1: WR222-WLAN+NB2+M1

    Support NB-IoT and Cat.M1,

Model with NTN Satellite NB-IoT/M1 : WR222-WLAN+NTN

Cellular to Ethernet-WAN redundancy

All models with WiFi IEEE 802.11b/g/n

   2.4G 2T2R MIMO delivers up to 300Mbps throughput


Serial Communication & High Throughput Data Switching
・RS232/422/485 full functions for serial over LTE/NBIoT/WiFi/Ethernet data switching
・2 port Ethernet supports routing and bridging mode
・Modbus RTU to Modbus TCP Conversion
・Modbus Log to collect sensor data
・Modbus Write Single Coil, Register to configure sensor parameters
・Connect up to 25 sensors in one RS485 chain

 

Enhanced Cyber Security & Redundancy

・Firewall for inbound/outbound traffic
・OpenVPN (server/client)
・L2TP with PPP, PAP, CHAP(LCP, IPCP), GRE tunnel
・HTTPs/SSH secure login
・MQTTS with TLS encryption and X.509 authentication
・TACACS+ multi-user authentication for privileged user management

Industrial IoT LAN & Cloud Management

・Various configuration paths, including CGI WebGUI, 
     CLI, SNMP and RMON*
・1:1 NAT, port forwarding and NAPT for local traffic
    protection
・ARP response over 802.2 LLC SNAP
・Support SNMPv3 and entity-MIB (RFC4133), MIB II
   (RFC1213)
・NTP v3 time management
・WoMaster Software Utilities
    -NetMaster: Network Management System with VLAN visualization* and ERPS* Ring
    -ViewMaster: Configuration Management
    -ThingMaster: Interactive monitoring dashboard by Modbus Tag to collect data from Modbus devices
    -ThingMaster OTA: Realtime map showing the status, signal strength, location of the remote devices, over-the-air batch device registration, configuration and firmware upgrade*, alerts on critical events to prevent downtime
・Support MQTTS protocol, ready to use AWS/Azure and Private Cloud Agent for cloud management
・LLDP* for topology control, auto-topology drawing
・USB for easy field configuration and firmware update
・ Diagnostic tool includes Ping, TFTP, SNMP Trap, E-mail Alert and System Log

 

Rugged Design for Wayside Surveillance, ITS Application

・Effective heat dissipation design for operating in -40~70oC environments

・CE Marking

・IEC61000-6-2/IEC61000-6-4 heavy industrial EMC compliance

Specifications
 Technology
Standard 3GPP Release 11 Long Term Evolution (LTE), fallback 3GPP Release 7,8,9 for HSPA/UMTS

3GPP Release 13 NarrowBand IoT

IEEE 802.11b/g/n for Wireless LAN

IEEE 802.11i for Wireless Security

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

 Interface
Ethernet Port

2 x 10/100Base-TX RJ45, Auto Negotiation, Auto MDI/MDI-X
Router Mode: 1 WAN + 1 LAN, Bridge Mode: 2 LAN

System LED 1 x Power: Green ON
1 x SYS: Ready: Green On, Firmware Updating: Green Blinking
1 x Ra: 4G connection: Green On, 2/3G connection: Green Blinking, disconnected: Off
1 x Rb: AP mode: Green On, Station mode connected: Green Blinking, Station mode/radio disable: Off
1 x Serial Port: Activity: Green Blinking
Reset

System Reset(2~6 Seconds) / Default Settings Reset(over 7 Seconds)

SMA Socket

Up to 4 x RP-SMA Female (without Nylok)

ANT1/3 for Wi-Fi 2T2R, ANT2/4 for LTE 2T2R (Main/Div)

SIM Socket

1x Nano SIM

Micro SD

1x for field diagnostic data logging

Power Input

6-Pin Removable Terminal Block Connector

  2 Pin for Power (V+,V-)

  2 Pins for DI with isolation

     High: DC 2~30V

     Low: DC 0~1V

   2 Pins for 1x DO: 0.1A/30V with isolation

Serial

1x RS232/422/485, DB9 Female

5G RedCap WR222-WLAN+5GRC

WR222-WLAN+5GRC-EUSR

Multi-Band 5G NR/LTE-FDD/LTE-TDD, supports 3GPP R17 NR RedCap and LTE Cat.4, 2x2 MIMO

Bandwidth: NR SA sub-6 20MHz, LTE 20MHz Max.

5GNR Peak Data Rate: FDD:220Mbps(DL)/120Mbps(UL) TDD:200Mbps(DL)/100Mbps(UL)

LTE Peak Data Rate: FDD/TDD:150Mbps(DL)/50Mbps(UL)

5G RedCap: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n71/n77/n78

LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B71
LTE-TDD: B38/B40/B41/B42/B43

WR222-WLAN+5GRC-E

5G RedCap: n1/n3/n5/n7/n8/n20/n28/n38/n40/n41/n71/n77/n78

LTE-FDD: B1/B3/B5/B7/B8/B20/B28
LTE-TDD: B38/B40/B41/B42/B43

GNSS L1/L5, supports GPS, GLONASS, Galileo, NavIC, and Beidu

WR222-WLAN+5GRC-G

5G SA: n1/n2/n3/n5/n7/n8/n12/n13/n14/n18/n20/n25/n26/n28/n30/n38/n40/n41/n48/n66/n70/n71/n77/n78

FDD LTEB1/B2/B3/B4/B5/B7/B8/B12/B13/B14/B17/B18/B19/B20/B25/B26/B28/B30/B66/B71

TDD LTE: B34/B38/B39/B40/B41/B42/B43/B48

GNSS L1/L5, supports GPS, GLONASS, Galileo, NavIC, and Beidu

5GNR/RC Antenna (A-5GNR-5-SM) (5G New Radio/5G RedCap)

5GNR Antenna for 5G radio

Frequency: 700~5000 MHz

Gain: 4.12dBi @ 3500MHz

690~960MHz: 0.73~3.04dBi, 1700~1900MHz: 2.2~3.11dbi,

3300~3800MHz: 4.12~5.95dBi, 4000~5000MHz: 3.16~5.97dbi

Direction: Omni

Connector: SMA Male

Dimension: 220x27mmΦ13mm

 4G LTE CAT.4 WR222+WLAN+LTE
Standard GSM/GPRS/EDGE 3GPP Release 6
UMTS/HSPA 3GPP Release 8
LTE 3GPP Release 11
Data Rate LTE Cat.4:

GPRS: DL: Max. 85.6 kbps, UL: Max. 85.6 kbps

EDGE: DL: Max. 236.8 kbps, UL: Max. 236.8 kbps
HSPA: DL: Max. 42 Mbps, UL: Max. 5.76 Mbps
LTE-FDD: DL: Max. 150 Mbps, UL: Max. 50 Mbps, 2x2 DL MIMO

LTE-TDD: DL: Max. 130 Mbps, UL: Max. 35 Mbps, 2x2 DL MIMO 

WR222-WLAN+LTE-LA

FDD LTEB1/B2/B3/B4/B5/B7/B8/B28/B66 TDD LTE: B40 WCDMAB1/B2/B4/B5/B8 GSM/GPRS/EDGEB2/B3/B5/B8 

WR222-WLAN+LTE-EUX/ECGA

LTE: FDD B1/B3/B7/B8/B20/B28A

LTE: TDD B38/B40/B41 (EUX)

WCDMA: FDD B1/B8, GSM: B3/B8

WR222-WLAN+LTE-AUX

LTE: FDD B1/B2*/B3/B4/B5/B7/B8/B28

LTE: TDD B40

WCDMA: FDD B1/B2/B4/B5/B8, GSM: B2/B3/B5/B8

WR222-WLAN+LTE-G/GH

LTE: FDD B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28

LTE: TDD B38/B39/B40/B41

WCDMA: FDD B1/B2/B4/B5/B6/B8/B19, GSM: B2/B3/B5/B8

LTE-GH support additional LTE B66, TDD B34

LTE Default Antenna

Frequency: 704~960/1710~2690 MHz
Gain: 2 dBi
Dimension: 161xΦ13 mm

 Satellite+Cat M1+NB2 WR222-WLAN+NTN

IoT NTN (Skylo)

L: B255; S: B256, B23

250kbps DL/200kbps UL

LTE CatM1

B1/2/3/4/5/8/12/13/18/19/20/25/26/27/28/66

Max.589kbps DL, 1119kbps UL

LTE NB2

B1/2/3/4/5/8/12/13/18/19/20/25/26/28/66

NB2: Max.127kbps DL, 158.5kbs UL

GNSS

GPS/GLONASS/BeiDou/Gallileo/QZSS

NB-IoT/M1 WR222-WLAN+NB2+M1
Standard

LTE 3GPP Release 14

Data Rate

Data Rate:

Cat M1: Max. 588kbps(DL), Max. 1119Kbps(UL), Cat NB2: Max. 127kbps(DL), Max. 158.5Kbps(UL)

EDGE: Max. 296Kbps (DL), Max. 236.8Kbps (UL), GPRS: Max. 107Kbps (DL), Max. 85.6Kbps (UL) 

Band Information

Cat M1: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B27/B28/B66/B85

Cat NB2: LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85

EGPRS: 850/900/1800/1900MHz

 WiFi Properties
Standard

IEEE 802.11b/g/n,  Up to 2T2R MIMO

Data Rate

802.11b: 11Mbps / 802.11g: 54Mbps / 802.11n: MCS0 ~ 15, max. 300Mbps

Frequency

ISM Band, 2.412GHz ~ 2.462GHz (CH1~11), programmable by regional regulation

RSSI

≦20db, compliant with CE request

Wi-Fi Default Antenna

Frequency: 2400~2500/ 4900~5900 MHz
Gain: 2.4GHz: 2.5 dBi, 5GHz: 3dBi
Dimension: 196xΦ13 mm

 Software
Management Interface CGI WebGUI, Command Line Interface (CLI), IPv4/IPv6*, Telnet, SNMP v1/v2c/v3, DDNS, DHCP server/client, DHCP Relay, TFTP, FTP(active/passive), System Log, SMTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy), PPPOE*

Traffic Management

Flow Control*, Traffic shaping
User Management

Radius client, TACACS+, local database

Time Management

NTPv3, SNTP, Cellular Time

IoT Industrial Protocol

Serial to MQTT Conversion, Modbus RTU to MQTT Conversion, Modbus RTU to TCP Conversion, MQTTS, CoAP, RESTful API

Network Management

IPv4, SNMP v1/v2c/v3/Trap, MIB II, Entity MIB, DHCP server/client, DHCP relay, TFTP, ARP response over 802.2 LLC SNAP, Proxy ARP, DNS (client/proxy), private MIB

Traffic Management

1:1 NAT, NAPT(SNAT/DNAT), Port Forwarding

Redundancy Protocol

WAN/LTE Redundancy

WAN/Routing/NAT/Firewall/VPN

  Routing: Static Route
  NAT: 1-1 NAT, NAPT(SNAT/DNAT) ), Port Forwarding, DMZ
  Firewall: Stateful Inspection firewall, IP/Port Filter, MAC ACL
  VPN: OpenVPN,  L2TP, GRE

Security

IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password management
WLAN AP Security: Share Key, WPA/WPA2-PSK(Pre-Shared Key), WPA/WPA2 Enterprise
Encryption: 64/128-bit WEP(Wired Equivalent Privacy), TKIP(WPA-PSK), AES(WPA2-PSK), ), MAC Filter

Serial Communication

TCP Server/TCP Client/UDP mode, TCP Alive check, Force TX Delimiter/Timeout/interval/length, Long Distance Termination

VPN

OpenVPN (server/client), L2TP, GRE

Private Cloud

ThingsMaster, ThingMaster OTA

Public Cloud

AWS Agent, Azure Agent

Location

Google map, Baidu map

Cellular Configuration

Radio on/off, 2G, 3G and 4G modes configurable, SIM Security, Connection Status, Cellular to Eth-WAN Redundancy, Backup SIM Retry (1-10 times)

WLAN Configuration

WLAN Basic Settings: Radio on/off, AP/client mode, 2.4G 11n Band and Frequency selection, SSID/Multi-SSID configuration, SSID broadcast, Cellular to WLAN Auto Offload and advanced WLAN settings, 802.1X

Utility

ViewMaster, NetMaster, Ping, Traceroute

MIB

MIB-II, Entity MIB, WoMaster Private MIB

Wi-Fi Max. Client

Up to 20

 Power Requirement
Input Voltage

24V (9~30VDC)

Reverse Polarity Protect Yes
Input Current

WR224-WLAN+LTE: 0.18A@24V

Power Consumption

WR224-WLAN+LTE: Max 4.32W@24VDC full traffic, suggest to reserve 15% tolerance

 Mechanical
Installation

Wall Mount/DIN Rail (DIN bracket not included)

Enclosure Material Steel Metal 
Dimension

86 x 105 x 29mm(W x D x H) / without mounting Clip

Ingress Protection IP30
Weight

Around 350g without package/antenna

 Environmental
Operating Temperature & Humidity -40°C~70°C, 5%~95% Non-Condensing
Storage Temperature -40°C~85°C
MTBF >200,000 hours
Warranty 3 years
 Approval
CE

RED Compliance

Safety: EN 62368-1 (EN60950-1 Compliance and Replacement)

EN 62311 MPE assessment

EN 301 489-1/17/52, EN 55032/55024

  includes EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11

EN 300 328*

EN 301 908-1*

FCC

FCC part 15B Class A Compliance, FCC Approved LTE/WLAN Module

EMC

EN61000-6-2/EN61000-6-4

  includes EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8

  and CISPR 22/16  

 

Ordering Information

 Model Name
WR212-WLAN
Industrial Wireless IIoT Field Router, 2FE+1COM, SD, 802.11b/g/n WLAN (antennas included)
WR222-WLAN+5GRC-EUSR

Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, 5GRC-EUSR

WR222-WLAN+5GRC-E

Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, 5GRC-E

WR222-WLAN+5GRC-G

Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, 5GRC-G

WR222-WLAN+LTE-G Industrial Wireless IIoT Field Router, 2FE+1COM, SD, 802.11b/g/n WLAN, 1SIM, LTE-G
WR222-WLAN+LTE-LA Industrial Wireless IIoT Field Router, 2FE+1COM, SD, 802.11b/g/n WLAN, 1SIM, LTE-LA
WR222-WLAN+LTE-EUX

Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, LTE-EUX

WR222-WLAN+LTE-E Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, LTE-E
WR222-WLAN+LTE1-E Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, LTE1-E
WR222-WLAN+NTN-S Industrial Wireless IIoT Field Router, 2FE+1 Serial, DI+DO, SD+1SIM, 802.11b/g/n WLAN, IOT NTN, LTE CAT M1, LTE NB2, GNSS
WR222-WLAN+NB2+M1
Industrial Wireless IIoT Field Router, 2FE+1COM, SD, 802.11b/g/n WLAN, NB2+M1
WR222-WLAN+LTE-GH-EC (by MOQ) Industrial Wireless IIoT Field Router, 2FE+1COM, EC OS, 802.11b/g/n WLAN, 1SIM, LTE-GH

*GPS support by request(When GPS is supported, one Wi-Fi receive antenna SMA will be removed.)

*5GRC-EUSR/LTE-E doesn’t support GPS feature

*LTE-GH-EC: The model doesn’t support Serial port and SD card.

*LTE-GH-EC: The model is equipped with SIMCOM 7600G-H LTE module for project need.

*NTN: NB2+M1+NTN by request

Package List

1 x Product Unit

1 x 6-pin Removable Terminal Connector

 

1 x Din Clip Mounting Kit

1 x Quick Installation Guide

Default Enclosed Antennas:

WR212-WLAN/ WR212A-WLAN: 2 x WLAN Antennas, White

WR222-WLAN+NB1+M1/ WR222A-WLAN+NB1+M1:1xLTE Antennas, Black+2xWLAN Antennas, White

WR222-WLAN+5GRC: 2x5G Antennas, Black+ 2xWLAN Antennas, White

WR222-WLAN+LTE: 2xLTE Antennas, Black+ 2xWLAN Antennas, White

Optional Accessory  

AD-DB9M-TB10

ADAPTER DB9 MALE TO TERMINAL BLOCK 10PIN
   
                                   

  • Built-in Microsoft Azure and Amazon AWS agent
  • ​Secure IoT Modbus Tags
Tag-based data acquisition with MQTTS support
MQTTS client acting as publisher and subscriber
The latest TLS encryption and X.509 authentication
Selectable serial port and data type. Sensor alive check and display sensor value
 
  • Multi-Level User Passwords
Different centralized authentication servers are supported such as RADIUS and TACACS+. Using a central authentication server simplifies account administration when you have more than one switches in the network.
Authentication Chain is also supported. An authentication chain is an ordered list of authentication methods to handle more advanced authentication scenarios. For example, you can create an authentication chain which first contacts a RADIUS server, and then looks in a local database if the RADIUS server does not respond.

  • Secured Remote Access by VPN
WR222 can act as a VPN server for data encryption and dynamic remote access. Multiple VPN protocols are supported such as OpenVPN, GRE, and L2TP.  The channels between multiple networks, ex. private/public/hybrid networks are fully secured and with authentication features.

  • MQTTS

MQTT relies on the TCP transport protocol. By default, TCP connections do not use encrypted communication. To encrypt the whole MQTT communication, ThingsMaster and other MQTT brokers allow the use of TLS instead of plain TCP. In the mission-critical industrial application, encryption is mandatory and highly suggested for industrial communication.

The MQTTS is standardized at IANA as “secure-mqtt”. All WoMaster Routers and Switches support the latest TLSv1.2 encryption and X.509 authentication.
  • ThingsMaster OTA (device management over the air) 
The OTA agent embedded in WR222 upgrades device management over the air, anywhere you are, and any time you want over your mobile devices.  ThingsMaster OTA is a secured local OTA software that can be installed in private or public service or even QNAP NAS (network-attached storage). With OTA, all device information such as location, warning event can be shown in real-time.  The maintenance such as configuration reload or device reboot can also be run by the group.
OTA Device Management